Retrofit Kit: Morimoto FX-R 3.0 Bi-Xenon (D2S)
$450.00 – $472.00 CAD
The Bi-xenon FX-R 3.0 system is the most powerful projector retrofit kit on the market. The updated FX-R 3.0's are powered by the standard-equipment Morimoto Elite D2S HIDs, offering the most bang for the buck. Will you have to cut and modify your headlights to install them? Most definitely. Will it be worth it? Oh yes.
Projectors: Morimoto FX-R 3.0 3″ OR 2.5″ Lens Bi-Xenon (Pair)
Ballasts: Morimoto XB35 or Morimoto XB55 (Pair)
Bulbs: Morimoto XB D2S (Pair)
Shrouds: User Preference (Pair)
Wire Harness: Morimoto Relay (1x) or CANBUS Standalones (Pair)
5 years for 35W Systems*
3 years for 50W Systems*
*Reduced to 2 years if the HIDs are running as the DRLs
High Power: The Bi-xenon FX-R Stage III System is the most powerful projector retrofit kit on the market. The updated FX-R 3.0’s are powered by the standard-equipment Morimoto Elite D2S HIDs, offering the most bang for the buck. Will you have to cut and modify your headlights to install them? Most definitely. Will it be worth it? Oh yes.
FX-R 3.0 Bi-xenon Projectors: Feature standard optically clear projector lenses to give them a super wide, intense beam pattern and a sharp and colorful cutoff line. Available with both LHD beam pattern for glare-free compatibility traffic patterns. Their standard 2.5″ Lens helps save space in tight-fitting applications, whereas the optional 3″ lens helps fill out bigger headlights with ease.
Morimoto XB35 Ballasts: Feature relocated igniters like OEM ballasts putting them far closer to the HID bulb. The lack of high voltage transmitted through wiring drastically reduces EMI/RFI (radio interference). Total system reliability is also improved by shielding the main circuit board from the static produced by these high voltage bursts on start up giving them a failure rate of less than .02%!
Morimoto XB D2S Bulbs: At the heart of the XB D2S bulbs is their perfectly aligned 100% Philips Quartz glass that houses a capsule from APL-USA. Using high quality halide salts from German-supplier Messer; the bulbs produce nearly the same luminosity (intensity) as the amazing Osram CBI bulbs at 5500K. No, you’re not seeing things here, but yes you will be seeing everything at night.
Morimoto Relay Harnesses: Have fully-sealed weather pack relays with revised circuitry, heavy-duty 14ga stranded copper wire, injection molded inline fuse holders, and full plug-n-play functionality. Forget about cutting and splicing, because all harness options in this kit will make your new low and high beam function perfectly from the original cabin controls.
Remember to Accessorize: Be sure to add some Morimoto RetroRubber butyl-rubber glue to you cart along with this kit to fight back against moisture-intrusion after resealing your headlights. For the cost, it’s cheap insurance for sure. Want to add LED Halos to accent the new projector setup? Check out the all-new XSB LED halos and color changing halo rings in the “LED Accessories” sections.
Projectors: Low and High Beam Capable
Wire Harness: Match your original bulb size (use contact section if you’re not sure)
Vehicles: Universal Fit (will require modification)