Retrofit Kit: Morimoto Mini H1 7.0 Bi-Xenon (H1)
$365.00 – $515.00 CAD
Bolt-on high performance HID projector light output! The Morimoto Mini H1 7.0 Stage III Retrofit system is the most universal, easiest to install, high performance HID projector retrofit system available to date! Based around the latest Morimoto Mini H1 7.0 bi-xenon projectors and paired with a Morimoto Elite HID system this is the a perfect kit for beginners and professionals alike.
Projectors: Morimoto Mini H1 7.0 Bi-Xenon LHD (Pair)
Ballasts: Morimoto XB35 2.0 or XB55 2.0 (Pair)
Igniters: XB AMP (Pair)
Bulbs: Morimoto XB H1 (Pair)
Shrouds: User Preference (Pair)
Wire Harness: Morimoto Relay Harness (Single) or Canbus Standalones (Pair)
5 years w/XB35 Ballasts
3 years w/XB55 Ballasts
Easy to Install: With the Mini H1’s threaded mounting shaft that fits through the pre-existing hole in the back of your headlight reflector; They make retrofitting projectors easier than ever with little to no mods.
Morimoto H1 7.0 Projectors: Feature clear lenses to give them a wide, intense beam pattern with a sharp and colorful cutoff line. The new 6.0 is enhanced with an all new optically advanced reflector bowl; improving low and high beam performance beyond all competing models. As the world’s biggest Morimoto distributor, all projectors tuned to perfection here in our shop.
Morimoto XB35 Ballasts: Feature relocated igniters like OEM ballasts putting them far closer to the HID bulb. The lack of high voltage transmitted through wiring drastically reduces EMI/RFI (radio interference). Total system reliability is also improved by shielding the main circuit board from the static produced by these high voltage bursts on start up giving them a failure rate of less than .02%>
Morimoto XB H1 Bulbs: At the heart of the XB H1 bulbs is their perfectly aligned 100% Philips Quartz glass that houses a capsule from APL-USA. Using high quality halide salts from German-supplier Messer; the bulbs produce nearly the same luminosity (intensity) as the amazing Osram CBI bulbs at 5500K. No, you’re not seeing things here, but yes you will be seeing everything at night.
Morimoto Relay Harnesses: Have fully-sealed weather pack relays with revised circuitry, heavy-duty 14ga stranded copper wire, injection molded inline fuse holders, and full plug-n-play functionality. Forget about cutting and splicing, because all harness options in this kit will make your new low and high beam function perfectly from the original cabin controls.
Accessorize: The optional Retro-Rubber glue is the most effective solution to fight back against moisture-intrusion after resealing your headlights. For the cost, it’s “cheap insurance” for sure. Want to add LED Halos to accent the new projector setup? Check out new all-new XSB LED Halos and our Size Guide, so you can pick out the right rings for your shrouds.
Projectors: Low and High Beam Capable (Bi-Xenon)
Wire Harness: Match your original bulb size
Vehicles: Universal Fit (may require modification)