Morimoto XSB Switchback LED Strips 1

Strips: Morimoto XSB (Switchback)

$98.00 CAD

Morimoto XSB LED strips are great for those tight to fit places and great to use as DRLs/park lights with the added benefit of a nice bright switchback amber turn signal mode. Very flexible as well allowing them to curve with the headlight housings for a nice fit. Although they cannot curve horizontal so make sure you have a nice flat and straight surface to mount them on before ordering.

WHAT'S INCLUDED
LED STRIPS: 2x Morimoto XSB 3.0 Switchback
DRIVERS: 2x XSB 3.0 w/ PWM & Fade-On-Function
WIRING: 3M Blue Wire Taps
WARRANTY: 3 Years

Need help? 24/7 Chat Available!
Clear
SKU: n/a. Category: .

Description

BETTER AND BETTER: It just doesn’t stop! That is, the continued improvement we’ve seen from Morimoto on their XSB Switchback Strips. You ask and they deliver, simple as that! Brighter White? Yes. Amazing Amber? Oh yeah. Upgraded Drivers? Done. Longer Wiring, You bet. Smoother, more refined Coating? Can do! The new 3.0 version of the Morimoto XSB LEDs is the best one yet, and honestly – we’re not sure what more to ask for!

INTENSITY AND UNIFORMITY: An updated blend of phosphorous silicone coats the front face of the XSB 3.0 Strips and is responsible for their neutral “white when off” look and their amazing, uniform intensity – which is unlike anything else on the market. Users complained that earlier generation XSB Strips had problems with stuff “sticking” to and/or causing a lot of wrinkles in the old softer coating – but that, our friends, is now a problem of the past!

FADE-ON-FUNCTION: Traditional switchback strips run the white, flash the amber, and then simply turn the white back on. That’s cool and all, but what’s even cooler is the fade-on-function of the new XSB 3.0 Strips! After the amber signal is turned off; their all-new LED Drivers utilize PWM to gradually ramp up the intensity of the white mode again. A small detail, but a neat one that looks awesome none the less. You can also pick up a set of the new Morimoto X-VF switchback bulbs to match – since they also have the cool new Fade-On Drivers.

AMBER ONLY? Though they come out of the box ready to run as a switchback system, the XSB Strips can easily also be wired for use as a bright Amber-only or White-only Strip if that’s what you want. Just wire up the appropriate input(s) and you’re ready to roll!

SIMPLICITY: Wiring is easy with a variant of the X Change Module integrated into the updated 3rd Gen LED drivers that power each ring. The white wire receives a constant 12V+. The black wire is grounded, and the orange wire is tapped into the turn signal circuit. Super simple!

FLEXIBILITY: Built on a ribbon-based circuit board that’s got a side profile of less than one millimeter thick and backed with 3M adhesive. The XSB strips are not only the most flexible LED strips on the market, but they can be mounted in tight spaces too. Finally you can forget about those bulky, unattractive silicone switchback strips for good. NOTE: These cannot flex side-to-side, only front-to-back.

RELIABILITY: The innovative Hybrid-LED technology delivers a virtually infinite lifespan of 50,000 hours. That’s almost six straight years! Because they’re based on much more stable and mature SMD-LEDs; they are considerably more reliable between hot/cold cycles compared to “new” COB based halos. This video explains the XSB LED technology a bit more in detail.

COMPATIBILITY
RETROFITS: Any straight surfaces within size range
FACTORY HEADLIGHTS: Any straight surfaces within size range
OTHER USES: Not to be used external of a sealed housing
NOTE: These do not flex laterally
LENGTH: Should not be modified/cut

TECH SPECS
COLOR LIT: 5500K (white mode)
COLOR WHEN OFF: Frosted White
FADE DELAY: 1.5 Seconds
RATED LIFESPAN: 50,000 hours
INPUT: 12V DCNOM
INPUT LENGTH: 89cm (35″)
WIDTH: 7mm
THICKNESS: 2mm

Additional information

Length

3″, 6″, 18″, 24″

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.