High Beam Splitters
$12.50
Quad high beams ftw! So you already have a halogen high beam? When retrofitting a bi-xenon projector into the low beams you can use the stock high beam plug to activate the bi-xenon solenoid at the same time, thus doubling your high beam output.
WHAT'S INCLUDED
High Beam Splitters: 1x Single Male Input -> Dual Female Outputs
Description
Plug-N-Play: Forget about crimp-on wire taps, these convenient “Y” pigtails make splitting or doubling the signals from your headlight system easy and clean.
Quad Retrofits: Use a splitter to run two low beam harnesses in parallel for four ballasts and then activate two pairs of bi-xenon solenoids off a single high beam output. Three total splitters needed.
Sport Bikes Retrofits: Instead of a single low beam and a single high beam, you can retrofit two bi-xenon projectors and split the single high beam output into both projector solenoids. Instant dual low beam dual high beam setup! (generally H7 Male to 9006/9006 female)
All Fitments: For the input, make sure to select the size that matches with your stock high beam bulb type. The output will generally be the female version of that same bulb, coupled with a 9006 to plug into your bi-xenon projector solenoid.
COMPATIBILITY
Use To Split Connector Type: 9005 or 9006
Reviews
There are no reviews yet.