Description

FEATURES & BENEFITS
More Power: While the XB Evo, XRGB Evo, and XB Evo Hybrid Headlights have no problem performing right out of the box, the Supercharged drivers allow users to maximize output.
On Road: The standard LED drivers are under-powering the LED projectors to ensure output levels remain just below the maximum limits for compliance reasons.
Off Road: If you want even more light for your off-road adventures, the Supercharged drivers will boost output by 30-50% over stock, but result in non-compliant levels of peak intensity.
Bolt-On: Easy to install in minutes and won’t affect the reliability or warranty of your new Morimoto headlights.
Compatible: With Morimoto XB Evo, XRGB Evo, and XB Evo Hybrid Super Duty headlights.

More Power: The XB Evo line of headlights are designed for enthusiasts who are serious about technology, styling, reliability, and performance – and while they have no problem checking all those boxes right out of their boxes: if you need even more output… here is your answer.

On Road: The Morimoto XB Evo Headlights are DOT compliant with all FVMSS108 regulations for on-road use in the USA. Their projector optics are so capable and efficient that their LEDs are only driven at about 50% of their full potential intensity to avoid exceeding limitations set by compliance. The system was designed in California by Morimoto’s lead optical engineer, Yoshi Ishida, to deliver maximum visibility, comfort, and safety, and that it does.

Off Road: Yes, you read that correctly. Out of the box, the XB Evos are only producing a fraction of their potential intensity for compliance reasons. So, you want even more light for your off-road adventures? These Supercharged LED drivers bolt on and boost both the low and high beam intensity by approximately 30-50%– all without sacrificing reliability or warranty.

Non-Compliant: While the Supercharged drivers easily enable the XB Evo, XRGB Evo, or XB Evo Hybrid to outshine the competition no matter the model, we must reiterate that they will result in non-compliant levels of peak beam intensity and therefore should not be used on public roads. Once installed, it is NOT possible to reduce intensity back to compliant levels without re-installing the standard DOT-Spec drivers.

Welcome Sequence: When installed on the XB Evo Hybrid version of these headlights, these will add the awesome welcome sequence to the projectors and DRL optics that isn’t normally active on that version of the headlights. Even though this does nothing for light output, it definitely looks cool, and there’s nothing wrong with that!

TECHNICAL SPECIFICATIONS
Power Rating : 1,500mA
Output Boost : 30-50 Percent Increase
Status Indicators : Red – Switched ignition power/fuse tap. Green – Low Beam power. Blue – High Beam power.
Input : XB Evo / XRGB Evo / XB Evo Hybrid multi-pin connector