• Description
• Additional information

Description

Usability: There are three micro-mounts integrated into their backing, making the XSB’s the easiest and cleanest rings on the market to install. Now you can forget about failing glue or wires wrapped around the face of your halos forever. Don’t get stuck with dripping glue or picture hanging wire visible inside your headlights. Reliability: The innovative Hybrid-LED technology delivers a virtually infinite lifespan of 50,000 hours. That’s almost six straight years! Because they’re based on much more stable and mature SMD-LEDs; they are considerably more reliable between hot/cold cycles compared to “new” COB based halos. This video explains the XSB LED technology a bit more in detail. Intensity and Uniformity: A special blend of silicone and phosphor covers the face of each ring. This proprietary coating is responsible for the neutral “white when off” look of the XSB’s and their amazing, uniform intensity – which is unlike anything else on the market. Simplicity: Wiring is easy with a variant of the X Change Module integrated into the updated 2nd Gen LED drivers that powers each ring. The white wire receives a constant 12V+. The black wire is grounded, and the yellow wire is tapped into the turn signal circuit. Flexibility: Though they come out of the box ready to run as a switchback system, the XSB halos can easily also be wired for use as a white-only or amber only halo! TECHNICAL Kelvin Rating: 6000K Cool White Rated Lifespan: 50,000 hours Input Voltage: 12V WIRING: Input Length: 35″(89cm) White (Constant): 9006 Male (or strip and splice) Amber (Turn Signal): T-Tap (recommended to strip and solder) DIMENSIONS: Width: 7mm Thickness: 2mm Diameter: Listed size = OD]]>

[/x_tab] [x_tab class="additional_information_pane"]

Additional information

Outside-diameter	60mm, 110mm, 140mm

[/x_tab] [/x_tabs]